Crane Manufacturer and Exporter
- 10+ Years of Crane Export Experience
- Cranes Are Sold To 120+ Countries
- A Technical Team of 50+ People
- 3000+ Cases in Various Industries
Gantry Cranes
The gantry cranes are heavy cranes typically used to load and unload heavy items on docks and in rail yards or factories. As one of the most experienced gantry cranes manufacturers, we can produce different specifications of crane.
Which is better? Gantry Crane Or Overhead Crane
There will never be a proper answer to this question, while there will always a most suitable crane for you. Read further about this when you come across this puzzle. Due to the cost of the equipment, gantry cranes are usually more expensive than corresponding overhead cranes. While, in some case, gantry crane price is more cost efficient.
- The house is not prepared for the runway structure or the situation is not suitable for building the column of the runway structure. Although the gantry cranes are not the best choice used indoor, sometimes they are the best solutions. It will save you much of your money.
- In the near future, you need to use the crane in another place or you will use the crane in different places. Gantry crane is free standing by itself, there is no need of the runway structure.
- You are in a rent workshop. The building of the overhead crane runway structure is impractical. So the gantry crane may be the only choice for you.
- You need to handling the loads inside and outside of your workshop. The overhead crane is not proper for you especially when the distance outside of your workshop is long.
Why DGCRANE?
DGCRANE thinks for you
Just as shown in the picture above. In a well built factory, while not well prepared for the runway structure of overhead crane, we suggested to use the gantry cranes. To cope with the lifting height limits, we move the hoist at side of the cross girder, and then the lifting height is well improved. In DGCRANE, our engineer will think for you, every crane solution is unique, and is more proper for you.
High quality for you
We will never let a low quality crane slowdown your production efficiency and ruin the Brand of DGCRANE. We only sell the high quality crane with a proper price that really deserve it.
Reasonable price for you
Due to the strict quality control of our factory, our cranes will never the cheapest. While, compared with the European products, our gantry crane price will be a surprise for you (Mainly because of the low labor cost, you know it).
Rich Industrial Experiences
We can provide you with various optional functions according to the special lifting needs in your industry, such as electronic anti-sway, remote monitoring, lifting synchronization and other functions. These are just a part of them.
Product Design Specifically for Export
Crane and Plant Integration Solutions Are Available
We don't just have cranes and other lifting products, we also offer a one-stop shop for custom steel buildings.
Adaptation to Special Plant Environments
We can meet the needs of factory environ-ments from -30 to 50 degrees Celsius, or for cranes with explosion-proof requirements.
Customized Voltage Supply
We can customize the generator to meet the different voltage requirements around the world, whether the voltage in your country is 100V~130V or 220~240V. Alternatively, generators are available.
Adequate Accessories
We are well equipped with spare parts that not only compress the production cycle and improve productivity, but also enable timely response in after-sales maintenance.
Flexible Procurement Programmes
- Transport Costs
- Cross Girder
- Other Parts
- Transport Costs
- Cross Girder
- Other Parts
Complete plane
Complete plane
Just an glance at the Overhead Crane Costs Pie Chart shown on the left side, we will see that the transport costs are very high, and the Cross girder takes the most parts of it. If we can reduce this part, things will be different. So, here comes two crane sale plan: Complete and Component.
A Complete Overhead Crane is a complete crane, containing trolley, cross girder, end trucks, electrification systems and all other parts needed in a crane. Before shipping, the crane is fully asembled and tested in our factory. While, of course, for the convenience of delivery, the crane will be disassembled when shipping. Due to the Easy Installation Feature of our crane, the installation will be simple. So this is the most comfortable, and time-saving way for your.
Except the cross girder, A Component Overhead Crane consisting all the rest parts. The huge steel structure (cross girder) will not appears in this sale plan. So most parts of the transport costs will be saved. In this way, your will need to provide the cross girder. we will provide the most complete drawings and instructions, so you can built it locallly, even by yourself.
Both A complete crane and a component crane have the same quality, the only difference is how much labor and steel you provide.
Application Cases
Contact Details
DGCRANE is committed to providing the professional Overhead crane products and relavent service. Exported to Over 100 Countries, 5000+ Customers Choose Us, Worth to be Trusted.
Get In Touch
Fill out your details and someone from our sales team will get back to you within 24 hours!